MediaWiki API result
This is the HTML representation of the JSON format. HTML is good for debugging, but is unsuitable for application use.
Specify the format parameter to change the output format. To see the non-HTML representation of the JSON format, set format=json.
See the complete documentation, or the API help for more information.
{
"batchcomplete": "",
"continue": {
"lecontinue": "20211007143910|3",
"continue": "-||"
},
"query": {
"logevents": [
{
"logid": 13,
"ns": 0,
"title": "FreeBSD",
"pageid": 29,
"logpage": 29,
"revid": 282,
"params": {},
"type": "create",
"action": "create",
"user": "Steffe",
"timestamp": "2025-04-16T20:41:08Z",
"comment": "Created page with \"== Enlarging disk space == For full reference: https://docs.freebsd.org/en/books/handbook/disks/#disks-growing Shut down your VM, make a backup of it and then resize the hard disk drive. Then boot up FreeBSD again and do: gpart show It will show one of your partitions as CORRUPT. Fix it with something like: gpart recover vtbd0 gpart show It should now be OK. Note the index number of the partition you want to resize, then do something like: gpart resize -i 2 vtbd0 N...\""
},
{
"logid": 12,
"ns": 0,
"title": "TCPdump",
"pageid": 28,
"logpage": 28,
"revid": 277,
"params": {},
"type": "create",
"action": "create",
"user": "Steffe",
"timestamp": "2025-02-18T11:55:38Z",
"comment": "Created page with \"== Basic capture == Typical usage to capture network traffic going to a specific host: sudo tcpdump host xxx.xxx.xxx.xxx -w output.pcap == TLS capture == In case the traffic is encrypted using TLS or similar, you may be able to use the SSLKEYLOGFILE environment variable when running your client (or server) binary: SSLKEYLOGFILE=sslkeylogfile.log ./testapplication.py If this produces a sslkeylogfile.log file, you can use that to decrypt the TLS traffic. Open wireshark...\""
},
{
"logid": 11,
"ns": 0,
"title": "Tesla",
"pageid": 27,
"logpage": 27,
"revid": 270,
"params": {},
"type": "create",
"action": "create",
"user": "Stefan",
"timestamp": "2024-09-11T06:23:17Z",
"comment": "Created page with \"Link to Europe 2020 years Model 3 owners manual: https://tesla-info.com/doc/m3/model_3_owners_manual_europe_en_2020_44.pdf\""
},
{
"logid": 10,
"ns": 0,
"title": "BIOS",
"pageid": 26,
"logpage": 26,
"revid": 251,
"params": {},
"type": "create",
"action": "create",
"user": "Steffe",
"timestamp": "2024-07-06T17:50:37Z",
"comment": "Created page with \"BIOS are generally a bit trickier to configure after the upgrade to DDR5. Context Memory Restore Once a newly installed computer boots up, expect it to stay black for ~1-2 minutes during boot while DDR is trained. To avoid this, you can enable _Memory Context Restore_ found here on the ASUS B650E-F: Advanced - AMD CBS - UMC Common Options - DDR options - DDR memory features - Memory Context Restore By enabling this, the computer will then do one training on the next...\""
},
{
"logid": 9,
"ns": 0,
"title": "Saab",
"pageid": 25,
"logpage": 25,
"revid": 240,
"params": {},
"type": "create",
"action": "create",
"user": "Stefan",
"timestamp": "2024-04-13T13:33:06Z",
"comment": "Created page with \"Gr\u00e5kletig olja: http://forum.saabturboclub.com/showthread.php/129665-Majon%C3%A4s-p%C3%A5-oljesticka-samt-i-oljef%C3%A4llan-p%C3%A5-OG9-5 Byta topplockspackning: https://www.facebook.com/groups/saabtuboclub/posts/10156971846276755/ Efterdra toppen: http://forum.saabturboclub.com/showthread.php/4960-FAQ-Dragning-Efterdragning-av-topplock Vevhusventilation: https://shop.speedparts.se/sv/prod/saab/9-5-98-10/motor/vevhusventilation/9-5-04-10/ Vevhusventilationssats: htt...\""
},
{
"logid": 8,
"ns": 0,
"title": "Boats",
"pageid": 24,
"logpage": 24,
"revid": 219,
"params": {},
"type": "create",
"action": "create",
"user": "Stefan",
"timestamp": "2023-08-15T21:11:35Z",
"comment": "Created page with \"Good resource covering details on Evinrude E-Tec: https://continuouswave.com/whaler/reference/\""
},
{
"logid": 7,
"ns": 0,
"title": "Backup",
"pageid": 23,
"logpage": 23,
"revid": 217,
"params": {},
"type": "create",
"action": "create",
"user": "Stefan",
"timestamp": "2023-07-19T16:28:24Z",
"comment": "Created page with \"Some interesting backup tools: https://www.borgbackup.org/ https://github.com/m-manu/rsync-sidekick\""
},
{
"logid": 6,
"ns": 0,
"title": "Raspberry Pi",
"pageid": 22,
"logpage": 22,
"revid": 192,
"params": {},
"type": "create",
"action": "create",
"user": "Stefan",
"timestamp": "2022-07-20T12:40:33Z",
"comment": "Created page with \"Disable Wifi power save If you have Wifi power save enabled, you may experince \"hangs\" when having an open SSH terminal to the device. You can verify if power save is enabled...\""
},
{
"logid": 5,
"ns": 0,
"title": "Balboa GS523DZ",
"pageid": 21,
"logpage": 21,
"revid": 188,
"params": {},
"type": "create",
"action": "create",
"user": "Stefan",
"timestamp": "2022-01-11T07:56:28Z",
"comment": "Created page with \"Some Balboa SPA controllers expose a RS-485 connection (to add on a Balboa Wifi module) which makes it possible to communicate with it. Then the following types of projects ar...\""
},
{
"logid": 4,
"ns": 0,
"title": "Home Automation",
"pageid": 20,
"logpage": 20,
"revid": 187,
"params": {},
"type": "create",
"action": "create",
"user": "Stefan",
"timestamp": "2022-01-11T07:53:09Z",
"comment": "Created page with \"[[Home Assistant]] [[Balboa GS523DZ]]\""
}
]
}
}