BIOS: Difference between revisions

From indicium
Jump to navigation Jump to search
No edit summary
No edit summary
Line 13: Line 13:
This allows for auto overclocking according to your DDR5 memory. This may increase DDR training time.
This allows for auto overclocking according to your DDR5 memory. This may increase DDR training time.


Enabling both options should work well, but sometimes it gives stability issues, and you have to refrain from using one of them.
Enabling both AMD EXPO and Context Memory Restore should work well, but sometimes it gives stability issues, and you have to refrain from using one of them.
 
For me, it worked fine with the 1807 BIOS, but not with the 2616 BIOS.


= No display =
= No display =
Sometimes the displayport can not be used while configuring BIOS. This is the case on the ASUS B650E-F in conjunction with a RTX 3070 graphics card. You have to connect the HDMI to see the BIOS screen every time.
Sometimes the displayport can not be used while configuring BIOS. This is the case on the ASUS B650E-F in conjunction with a RTX 3070 graphics card. You have to connect the HDMI to see the BIOS screen every time.

Revision as of 17:54, 6 July 2024

BIOS are generally a bit trickier to configure after the upgrade to DDR5.

Context Memory Restore

Once a newly installed computer boots up, expect it to stay black for ~1-2 minutes during boot while DDR is trained.

To avoid this, you can enable _Memory Context Restore_ found here on the ASUS B650E-F:

Advanced - AMD CBS - UMC Common Options - DDR options - DDR memory features - Memory Context Restore

By enabling this, the computer will then do one training on the next reboot, and then reuse that data for upcoming boots, giving the same kind of boot behavior as DDR4 and below.

AMD EXPO

This allows for auto overclocking according to your DDR5 memory. This may increase DDR training time.

Enabling both AMD EXPO and Context Memory Restore should work well, but sometimes it gives stability issues, and you have to refrain from using one of them.

For me, it worked fine with the 1807 BIOS, but not with the 2616 BIOS.

No display

Sometimes the displayport can not be used while configuring BIOS. This is the case on the ASUS B650E-F in conjunction with a RTX 3070 graphics card. You have to connect the HDMI to see the BIOS screen every time.