BIOS

BIOS are generally a bit trickier to configure after the upgrade to DDR5.

Context Memory Restore

Once a newly installed computer boots up, expect it to stay black for ~1-2 minutes during boot while DDR is trained.

To avoid this, you can enable _Memory Context Restore_ found here on the ASUS B650E-F:

Advanced - AMD CBS - UMC Common Options - DDR options - DDR memory features - Memory Context Restore

By enabling this, the computer will then do one training on the next reboot, and then reuse that data for upcoming boots, giving the same kind of boot behavior as DDR4 and below.

AMD EXPO

This allows for auto overclocking according to your DDR5 memory. This may increase DDR training time.

Enabling both options should work well, but sometimes it gives stability issues, and you have to refrain from using one of them.

No display

Sometimes the displayport can not be used while configuring BIOS. This is the case on the ASUS B650E-F in conjunction with a RTX 3070 graphics card. You have to connect the HDMI to see the BIOS screen every time.